Products
Indoor Wireless
Outdoor Wireless
Security Routers
Cables
Spectrum Analyzers
Antennas
IP-Video
VOIP
3.5G/3.75G
Power Supply
WiMAX
Fax Modem
LOHU Cloud Service
Mobile Accessories


Distributor/Partner Login
Username :
Password :
ATS (Redundant PDU)
ATS (Redundant PDU)

Category :   PDU

Code : ATS (Redundant PDU)


     .Product Details.

Functions :

When Critical Equipment Demands Continuous Power Availability The EPOWER Automatic Transfer Switch is designed to support mission critical network and communications equipment where downtime is not an option package and installation flexibility are ideal for high density applications such as equipment racks and enclosures. It provides reliable, redundant AC power and space is at a premium. Its small supplied by the customer facility to critical Two Power Sources, One Great Solution The ATS is a dual input, rackmountable power distribution unit (PDU) with a built in automatic transfer switch. The Micro SmartSwitch is capable of receiving power from two independent AC power sources and utilizes a built-in automatic AC transfer switch to quickly switch between them. This provides AC power line redundancy to critical computer or communications equipment in a rack  communications equipment in a rack environment.
Grouped Receptacles and Circuit Breaker protection The ATS provides twelve receptacles, protected against output short circuits by four breakers, and is capable of supporting 24A distributed across its output for distribution to the connected loads . Input power to the ATS is supplied by two attached 12-foot cords, each terminating with a NEMA L6-30 plug to connect to utility power or to an uninterruptible power supply (UPS) system. LED indicators on the front panel indicate whether utility power is being supplied by the primary source phase "A" or the Build-in Network Module The LE series ATS also is build-in network module. It can provide both of the power source information and notify administrator when the power source EPOWER Power Management Technology Centralized power management for various server platforms and heterogeneous power devices. connected load.
The ATS is designed to be mounted in a "1U"configuration within a rack, allowing it to be used in a wide variety of applications secondary source phase "B.".transfer is triggered.
Support various brands of UPS and battery
Support various server plat forms to safely shutdown and start the critical network server and Ultra flexibility, Console/Manager/Agent three storage devices

Features

Installed in Rack

Horizontally

Power Monitor

Web

Power Control

Web

Power Action

Automatic Transfer Switch

Event Alert

Email, Trap

Protection

Circuit Breaker

Includes

Mounting Bracket; User manual; SNMP Utility.


Specification

Communication

LAN Interface

1 x RJ45;10/100M Auto Detect

Input

Nominal Voltage

200 to 240 VAC

On-Line Voltage

180 to 262 VAC

Frequency

50/60 HZ

Connector

2 x NEMA L6-30P Power Cord 12 inches

Protection

2 x Circuit Breaker 30A

Surge

500 Joules

Output

Connector

12 x IEC 320-C13 (4 segments)

Protection

4 x Circuit Breaker 10A

Power

2400 VA

The Max. Current

24A

Detection and transfer time

50Hz < 20 ms; 60Hz < 16ms

Detection and transfer time

50Hz < 10 ms; 60Hz < 8ms

Operation

Operation Temp.

0 - 40 degree C

Storage Temp.

-30 - 60 degree C

Relative Humidity

10% to 80%; non-condensing

Operation Altitude

0 to 3,000 M (10,000 ft)

Size LXWXH   

44 x 432 x 216 mm

Weight    

7 kg

 



Main Page |    Why Lohu? |    Downloads |    Contact Us
All Rights Reserved to Lohuis Networks 2008